LONGSHINE MICROSYSTEM, INC.

LCS-6624, LCS-6624G(REV. 1)

Data bus: 16-bit, ISA

Size: half-length, full-height card

Hard drives supported: Two IDE drives

Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB

Special Features: Two serial, one parallel

LCS-6624-G: Game port

[Image]

                          CONNECTIONS

                    Function                       Location

  34-pin data cable connector-floppy drive            J1

  40-pin AT Interface (IDE) connector-internal        J2

  16 pin game port-internal (LCS-6624-G)              J3

  10-pin serial port 2-internal                       J4

  DB-9 male connector-serial port 1                   J5

  DB-25 female connector-parallel port                J6

  4-pin connector-drive active LED                    JP1

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

  »   Factory configured - do not       JP2/jumper 4          closed
      alter

  »   Factory configured - do not       JP3/jumper 3          closed
      alter

  »   Floppy drive enabled                   JP4               open

      Floppy drive disabled                  JP4              closed

  »   Hard drive enabled                    JP4A               open

      Hard drive disabled                   JP4A              closed

  »   Parallel port set to LPT2 on       JP5 & JP5A          pins 1 & 2
      IRQ7                                                    closed

      Parallel port set to LPT3 on       JP5 & JP5A          pins 2 & 3
      IRQ5                                                    closed

  »   LCS-6624 not grounded to host          JP6               open

      LCS-6624 grounded to host              JP6              closed

                     SERIAL PORT 1 (J5) CONFIGURATION

             Port 2                  JP3/1         JP2/2         JP2/3

  »   Serial port 1 set to COM1      closed        open         closed
      (3F8H-3FFh)

      Serial port 1 set to COM3       open        closed        closed
      (3E8H-3EFh))

                     SERIAL PORT 2 (J4) CONFIGURATION

             Port 2                  JP2/1         JP2/2         JP2/3

  »   Serial port 2 set to COM2     closed         open         closed
      (2F8H-2FFh)

      Serial port 2 set to COM4      open         closed        closed
      (2E8H-2EFh)